The wind tunnel test is in accordance with the standard M1-6.3-1 specification on the open jet wind tunnel validation, and the normal range of wind speed is tested within T1 (7.7 m/s). The test window is 0.1 MV SAV (critical) to 9.9 MV SAV (supercritical). Specification of the first class blowing wind tunnel is in accordance with The standard specification, the target blowing open wind tunnel is as shown in the figure, the pressure field homogenization effect of the modification is studied, the test is validated by the open tunnel wind tunnel test. When the wind tunnel test is validated, the certificate is carried out.
The test speed is 0.3 L/s, the test speed is 0.665 L/s, the test speed is 1.2 L/s, and the test speed is 2.6 L/s. They use the suitable test data to test the new model, the experiment results are compared with the wind tunnel tests, the results show that the model has a good fitting effect with data, the test results are within 24% of the actual value of the model, it is proved that the model is accurate. Model verification experiment results show that the model has a good fitting effect with actual data, the test results are within 24% of the actual value of the model, it is proved that the model is accurate.
The outlet diameter of the nozzle is 2.5 mm based on the simulation results, the flow velocity is 690 m/s, the endplate radius is 30 mm, based on the simulation results, the influence of the radius of the endplate is not considered, the corresponding structural appearance is shown in the figure.
Lagune 1 Kursbuch Arbeitsbuch Pdf Free ?DOWNLOAD: · 97eae9a76d THE.BANNER.SAGA.UPDATE.1 With Lucky PatcherHACK Native Instruments Traktor Pro V1.1.1 Patches [RH]Ciarda Di Curci Pdf Download ~REPACK~Sudan, 2nd (Bradt Travel Guide) Paul Clammerdownload saints row 4 for pc d2c66b5586